Non Contact Automatic Tap Sensor

Non Contact Automatic Tap Sensor

Non Contact Automatic Tap Sensor

Regular price Rs. 5,999.00 Sale price Rs. 2,350.00

Automatic Sense Infrared Water Saving Device for Bathroom Sink Faucet which is IPX6 Waterproof Water Overflow Protection.

It is optimized with infrared sensing with MCU algorithms and pulse-interval sampling to reduce product energy consumption and ensure the consistency and stability in complex environments.

The motion detection sensor is mounted around the percolator, where the water comes out. Once mounted, it does not require touch for starting, it just needs to be close to the sensor hand, and the water jet will start instantly. I find it very useful, especially for the bathroom, because in this way you no longer have to put your hand on the battery to let go of the water when you come out and you want to wash your hands after you get in touch with money or door handles.

Specification:

Weight

105g

Size

60x34x49mm

Standby Energy Consumption

≤0.2mW

Working Water Pressure

0.05-0.8MPa

Sensing Area

Side Sensor 0-5cm/Bottom Sensor 0-10cm

Water Efficiency

First Level

Protection Grade

IPX6

Charging Method

USB

 

Advantages:

- Inductively drains water.

- Water-saving.

- Convenient to disassemble and assemble.

- Super long battery life.

- Water overflow protection.

- IPX6 Waterproof.

There we get six adapters which can be used to install the sensor water saver by yourself and there we got no use of any plumber. Remove your current tap aerator and replace it with one of the six adapters. Then charge the sensor unit and with a simple click, you attach the unit to the adapter. Easy as that.

When you have your hands full or they are dirty, this device is very handy, because without touching you can control your faucet (on/off).

The internal battery is safely covered between a rubber pad and cannot be removed but you can charge it by USB. Just a matter of detaching the unit and charge it with a micro USB cable. This was not needed in the time (3 months).

Features:

  1. Upgrade double sensor for faucet, two sets of sensing areas, two water modes, 0.25-second fast induction.
  2. Drains water inductively by IR, reducing touch pollution.
  3. First-class water efficiency, energy-saving and environmental protection.
  4. Simple design style, adapt to various home styles.
  5. 6 sets of adapters, meet your different needs as per your requirements.

Two Sensors Mode:

Bottom Sensor: Washing the face and washing the new fun bottom sensor to meet the short-term water demand. When the sensor enters the bottom sensing area (with a limited distance of 10cm), the water starts. When the sensor is away, the water is stopped. If the sensor stays in the bottom sensing area, the water will stop automatically after more than 20 seconds of water discharge, which is needed for daily cleaning.

Side Sensor: The side and side sensors of the pots and pans are satisfied with the water storage use requirements. When the sensor enters the side sensing area (with a limited distance of 5 cm), the water starts to flow. The water discharge time lasts for 3 minutes, and the water remains even if the sensory object leaves. If the sensor enters the side sensing area again during the water discharge process, the water can be stopped at all times, which is a good choice for water storage.

Note:

Within 75 ℃ water temperature is OK.

Package Included:

1 x Infrared Induction Water Saving Device For Faucet

1 x Installation Wrench

3 x Seal Rings

6 x Adapters

1 x Instructions

Wholesale Price
Fast Shipment
Certified Quality